Hioki-LR8410-20 Wireless logging station without modules
Hioki_LR8410-20_fam_W

Hioki-LR8410-20 Wireless logging station without modules

Leverandør: Hioki E.E. Corporation
Varenummer: Hioki-LR8410-20
PDF Download: Hent brochuren her

Vælg modul(er)



Total er excl. moms: DKK 18.580,00
Antal:
tam_new_but2
Wireless Multi-channel Data Logger Captures Up to 105 Data Points via Bluetooth® Wireless Technology

 Video:  http://www.hioki.com/movie/LR841020.html

 

  • Download data using Bluetooth® wireless technology
  • Install logging modules in hard-to-reach locations (over line-of-sight distances of up to 30 meters (*1) )
    (*1) The presence of obstructions may shorten this range
  • Logging station controls up to seven logging modules, allowing you to collect 105 channels of data
  • 100 msec simultaneous sampling across all channels (rapid scanning method)
  • Two types of logging modules measure voltage, temperature, resistance, and humidity
  • Quick Set guide makes configuration a breeze
 
The LR8410-20 alone is not capable of making measurements. One or more input modules are necessary to measure. The main unit and input modules are not bundled with the Battery Pack Z1007. Thermocouples are not provided by HIOKI, and must be purchased from a separate vendor. Note: Use only HIOKI SD Memory card, which is manufactured to strict industrial standards, for long-term storage of important data. Correct operation of non-HIOKI SD cards or USB memory sticks are not guaranteed.
Countries and regions where wireless operation is currently supported: Japan, U.S.A., Canada, EU, Norway, Switzerland, Turkey, Singapore (labeled products only) These products emit radio waves. Use of radio waves is subject to licensing requirements in certain countries. Use in countries or regions other than those listed above may constitute a violation of law, exposing the operator to legal penalties. Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION.
 
 
 
LR8410-20 Basic specifications (Accuracy guaranteed for 1 year)
 
No. of measurement channels Max. 105 ch (use 7 units of LR8510 or LR8511)
One or more LR8510 or LR8511 measurement units are required. Main unit can control up to 7 units with Bluetooth® wireless technology, which can be mixed by wireless connection
Pulse, Digital input [Pulse totalization] [Rotation count] Not available
Recording intervals 100 ms(*2), 200 ms to 1 hour, 16 selections (All input channels are scanned at high speed during every recording interval)
(*2) Setting not available when the thermocouple burnout detection setting is on
Data storage Internal memory: 8 M-words, Data storage media: SD memory card or USB memory stick (Only data recorded to a genuine HIOKI SD memory card is guaranteed)
Interface LAN: 100BASE-TX, Functions: Data acquisition using bundled software or PC commands, FTP server, FTP client, HTTP server function, or E-mail system
USB: USB 2.0 series mini-B receptacle ×1, Functions: Data acquisition using bundled software or PC commands, Transfer data from the SD memory card to a PC via USB drive mode
Display device 5.7 inch TFT color liquid crystal display (640 × 480 pixel)
Functions Save waveform data in real time to the SD memory card or USB memory stick, Numerical value calculations, Waveform calculations, 4ch alarm output (not isolated, common ground), and others
Power supply [AC adapter] Using the AC adapter Z1008 (100 to 240 V AC, 50/60 Hz), 45 VA Max. (including AC adapter), 15 VA Max. (exclusive of AC adapter)
[Internal battery] Using the Battery pack Z1007 (optional accessory), 3 hours of continuous use (at 23 °C reference data), 7 VA Max.
[External power] 10 to 28 V DC, 15 VA Max. (Please contact your HIOKI distributor for connection cord)
Dimensions and mass 230 mm (9.06 in) W × 125 mm (4.92 in) H × 36 mm (1.42 in) D, 700 g (24.7 oz) (excluding Battery pack)
Accessories Instruction manual ×1, Measurement guide ×1, SD Memory Card (2GB) Z4001 ×1, CD-R (data collection software “Logger Utility”) ×1, USB cable ×1, AC Adapter Z1008 ×1
 
LR8510 Basic specifications (Accuracy guaranteed for 1 year)
 
Measurement parameters [No. of channels] 15 analog channels; isolated scanning method input (2 terminals: M3 screw type)
[Voltage] ±10 mV to ±100 V, 1-5 V f.s. Max. resolution: 500 nV (Isolated between channels)
[Temperature: Thermocouples] -200 °C to 2000 °C (depends on sensor), Thermocouples (K, J, E, T, N, R, S, B, W), Max. resolution 0.01 °C (Isolated between channels)
[Pt 100, JPt 100 sensor] [Resistance] [Humidity] Not available
[Max. rated voltage between isolated input channels] 300 V DC
[Max. allowable input] ±100 V DC
[Max. rated voltage from isolated terminals to ground] 300 V AC, DC Caution: Max. voltage from terminals to ground without damage
[Digital filter] Select from OFF/ 50 Hz/ 60 Hz (the cut-off frequency is automatically set)
Control and communications Bluetooth® 2.1 + EDR (between Wireless Logging Station LR8410-20 and input modules); communication range: 30 m (line of sight), SSP security
Power supply [AC adapter] Using the AC adapter Z1008 (100 to 240 V AC, 50/60 Hz), 23 VA Max. (including AC adapter), 7 VA Max. (exclusive of AC adapter)
[Internal battery] Using the Battery pack Z1007 (optional accessory), 24 hours of continuous use (at 100 ms recording interval, 23 °C reference data), 120 hours of continuous use (at 1 minute recording interval, 23 °C reference data), 0.4 VA Max.
[External power] 10 to 28 V DC, 7 VA Max.
Dimensions and mass 150 mm (5.91 in) W × 90 mm (3.54 in) H × 56 mm (2.20 in) D, 340 g (12.0 oz) (excluding Battery pack)
Accessories Instruction manual ×1, AC Adapter Z1008 ×1, Bracket ×1
 
LR8511 Basic specifications (Accuracy guaranteed for 1 year)
 
Measurement parameters [No. of channels] 15 analog channels; isolated scanning method input (4 terminals: push-button type)
[Voltage] ±10 mV to ±100 V, 1-5 V f.s. Max. resolution: 500 nV, (Isolated between channels)
[Temperature: Thermocouples] -200 °C to 2000 °C (depends on sensor), Thermocouples (K, J, E, T, N, R, S, B, W), Max. resolution 0.01 °C, (Isolated between channels)
[Temperature: Pt 100, JPt 100 sensor] -200 °C to 800 °C, Max. resolution 0.01 °C, (Not isolated between channels)
[Resistance] 0 Ω to 200 Ω f.s. Max. resolution 0.5 mΩ, (Not isolated between channels)
[Humidity] 5.0 to 95.0 % rh (use with optional sensor), resolution 0.1 % rh, (Not isolated between channels)
[Max. rated voltage between isolated input channels] 300 V DC
[Max. allowable input] ±100 V DC
[Max. rated voltage from isolated terminals to ground] 300 V AC, DC Caution: Max. voltage from terminals to ground without damage
[Digital filter] Select from OFF/ 50 Hz/ 60 Hz (the cut-off frequency is automatically set)
Control and communications Bluetooth® 2.1 + EDR (between Wireless Logging Station LR8410-20 and input modules); communication range: 30 m (line of sight), SSP security
Power supply [AC adapter] Using the AC adapter Z1008 (100 to 240 V AC, 50/60 Hz), 23 VA Max. (including AC adapter), 7 VA Max. (exclusive of AC adapter
[Internal battery] Using the Battery pack Z1007 (optional accessory), 24 hours of continuous use (at 100 ms recording interval, 23 °C reference data), 120 hours of continuous use (at 1 minute recording interval, 23 °C reference data), 0.6 VA Max.
[External power] 10 to 28 V DC, 7 VA Max.
Dimensions and mass 150 mm (5.91 in) W × 90 mm (3.54 in) H × 56 mm (2.20 in) D, 320 g (11.3 oz) (excluding Battery pack)
Accessories Instruction manual ×1, AC Adapter Z1008 ×1, Bracket ×1