Vind datalogger
MaT-Wind101A Wind Speed Recording System incl anemometer, SW and cable

MaT-Wind101A Wind Speed Recording System incl anemometer, SW and cable

Leverandør: MadgeTech
Varenummer: MaT-Wind101A
PDF Download: Hent databladet her

* Vælg den ønskede kabellængde

Total er incl. moms: DKK 3.550,00
Total er excl. moms: DKK 2.840,00

The Wind101A is a complete system to accurately measure and record wind speed.

This low cost wind speed recording system comes complete with the Pulse101A data logger, weatherproof enclosure, a three-cup anemometer, PC software, USB communicator and a selectable cabling to quickly get it up-and-running.

The Pulse101A data logger can measure and record data for up to 500,000 readings and the storage medium is non-volatile, solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from a computer using the included user-friendly software.

The anemometer cable is available in 25', 50', 100' and 150' lengths.  (7,5m  15m  30m  and  45m)


Gust Survival Speed 214 mph (95 m/s)
Threshold Wind Speed 1.75 mph (0.75 m/s)
Maximum Measurable Speed 100 mph (contact factory about use at higher wind speeds)
Wind Resolution 0.085 mph at a 10 second reading rate
Wind Accuracy ±2 mph 0 to 10 mph, ±2.5 % of reading 10 to 100 mph
Rotation Diameter 7.5 in (191 mm)
Mount Accepts 0.5 in (13 mm) dia. Mast


Memory 500,000 readings; software configurable memory wrap
250,000 readings in multiple start/stop mode
Baud Rate 115,200
LED Indicators Red and Green
Push-Button Start Yes
Battery Life Dependent on frequency and duty cycle. 10 months typical at 25 °C and 10 second reading rate
Dimensions Data Logger: 1.4 in x 2.5 in x 0.6 in (36 mm x 64 mm x 16 mm)
Operating Environment -20 °C to +60 °C, 0 %RH to 100 %RH