ETI-292-571 ThermaData Logger 2 input Thermocouple (T) with LCD display
These two input ThermaData® thermocouple data loggers are housed in a waterproof, ergonomic case that is designed to meet IP66/67 protection. Four models are available, either blind or with LCD display, and either Type K or Type T thermocouples.
This Type T Thermocouple ThermaData®data logger measure temperature over the range of -100 to 400°C with a 0.1 °C resolution, auto-ranging to 1 °C over the range of 300 to 400°C. At programmable intervals the loggers will record the temperature, up to a maximum of 16000 readings or 2 x 8000 readings.
For details of the wide range of thermocouple probes available: Thermocouple Probes
Each logger incorporates a red and green LED, the flashing green LED indicates that the logger is active/logging and the flashing red LED indicates that your customised pre-set alarms have been exceeded. Each logger is supplied with a USB lead and ThermaData® Studio Software.
ThermaData Studio software
The ThermaData logger is connected to a PC via a serial or USB port lead. By selecting the relevant icon the data can be downloaded and displayed either as a graph, table or summary. The information can then be analysed by zooming in, storing to disc.
USB Connection Point
Simply remove the end cap to access the USB port. This allows the user to connect the logger to a PC via the USB lead (supplied) and upload the temperature readings collected.
Specification |
Thermocouple ThermaData® data logger |
Range |
-100 to 400°C |
Operating range |
-20 to +50 °C |
Resolution |
0.1 °C to 300 °C thereafter 1 °C |
Accuracy |
±0.4 °C ±0.1 % of reading |
Memory |
16000 or 2 x 8000 readings |
Sample rate |
0.1 to 255 minutes |
Battery type |
AA Tadiran - Li-SOCl |
Battery life |
3 years @ 20 °C |
Display |
10 mm LCD / 2 LEDs |
Water resistant | IP65 |
Dimensions |
35 x 67 x 109 mm |
Weight |
200 gram |