Hioki-LR8513 Wireless Clamp logger unit
Hioki-LR8513  Wireless Clamp logger unit

Hioki-LR8513 Wireless Clamp logger unit

Leverandør: Hioki E.E. Corporation
Varenummer: Hioki-LR8513
PDF Download: Hent brochuren her
Total er excl. moms: DKK 2.990,00
Antal:
tam_new_but2

WIRELESS CLAMP LOGGER LR8513 new products

Measure load current and leak current easily with clamp sensors

The Hioki LR8512/LR8513 are input modules of a wireless multi-channel data logger of pulse, logic signal and AC/DC current using Bluetooth® technology to send measured data to a central logging station. LR8410 series Wireless logger.

Note: The LR8512/8513 alone is not capable of making measurements.
Countries and regions where wireless operation is currently supported: Japan, U.S.A., Canada, EU, Norway, Switzerland, Turkey, Russia, Vietnam, and India.
Bluetooth® is a trademark of Bluetooth SIG, Inc. and licensed for use by HIOKI E.E. CORPORATION.

 

• Measure AC and DC load current and AC leak current
• Choose from eight current sensors
• Place inside a distribution panel, close the cover, and monitor measured values from the outside
• Measure power easily—just set the voltage and power factor
• Compact, two-channel model fits where other devices don’t
• Measurement data is sent to the Hioki LR8410-20 using Bluetooth® wireless technology
• Measurement data is saved even when communications are interrupted
• Three-way power (AC adapter, AA alkaline batteries, or external 5 to 13.5 V power supply)
• Instrument can store 500,000 data points per channel

 

LR8513 Basic specifications (Accuracy guaranteed for 1 year)

Operation Measurement data is sent wirelessly to the LR8410-20, which is required in order to collect data. Up to seven units can be controlled. Operates over a line-of-sight distance of up to 30 m (98.43 ft)
Measurement parameters [Number of channels] 2ch (common GND)
[Measurement modes] AC load current, DC load current, AC leak current (using current sensor)
[Measurement ranges] 500.0 mA AC to 2000 A AC, 10.00 A DC to 2000 A DC (By current sensor)
*Current and leak current that occur intermittently cannot be measured.
Measurement accuracy ±0.5% rdg.±5 dgt. (DC, AC 50/60 Hz)
*Add the sensor's accuracy when the current sensor is connected
Recording [Interval] 0.5 to 30 sec, 1 to 60 min, 14 selections, [Mode] Instantaneous value, average value
Power supply AC Adapter Z2003 (100 to 240 V AC, 50/60 Hz), or LR6 (AA) alkaline battery ×2, or External power: 5 to 13.5 V DC
Continuous use About 10 days reading instantaneous values using AA alkaline batteries (with an interval of 1 s and Bluetooth® on)
Dimensions and mass 85 mm (3.35 in) W × 75 mm (2.95 in) H × 38 mm (1.50 in) D, 130 g (4.6 oz) (excluding the battery)
Accessories CD-R (Instruction manual, Logger utility software) ×1, Measurement guide ×1, Caution paper (using radio wave) ×1, LR6 (AA) Alkaline battery ×2, Connection cable L1010 ×2