Hioki-3506-10 Capacitance HiTester
Hioki-3506-10  Capacitance HiTester

Hioki-3506-10 Capacitance HiTester

Leverandør: Hioki E.E. Corporation
Varenummer: Hioki-3506-10
PDF Download: Hent brochuren her
Total er excl. moms: DKK 41.110,00
Antal:
tam_new_but2

Kapasitans tester, 1 kHz, 1 MHz.

 

  • C (Capacitance, D (loss coefficient, tan δ), Q testing (1/tan δ)
  • Measure low capacitance
  • Testing source frequency: 1kHz, 1MHz
  • Measuring time: 1,5 mS (1 MHz), 2,0 mS (1 kHz)
  • RS-232C, GP-IB

 

Source frequency 1 MHz, High-precision and ultra high speed measuring from small-value capacitance possible
 
  • Enhanced repeatability measurement accuracy, so fittest for production line
  • A self-calibration function minimizes variations in measurement values due to changes in ambient temperature.
  • The cable-length-compensation function minimizes measurement errors when the measurement cable is extended
  • Contact errors while measuring can be detected by the Chatter Detection function
  • High-speed measurements in as little as 2 ms, measuring frequency of 1kHz, 1 MHz
  • BIN function, for easy component screening
  • Comparator function and Trigger-synchronized output function, for production line use
 
This product is not supplised measurement probes or test fixture. Please select the measurement probe or test fixture options for your application
 
Basic specifications:
Measurement parameters C (Capacitance), D (loss coefficient, tan δ), Q (1/tan δ)
Measurement range C: 0.001fF to 15.0000mF, D: 0.00001 to 1.99999, Q: 0.0 to 19999.9
Basic accuracy (typical value) C: ±0.14% rdg., D: ±0.0013
Measurement accuracy = basic accuracy × B× C× D× E, B to E is coefficient
Soruce frequency Model 3505: 1kHz, 100kHz, 1MHz, Model 3506: 1kHz, 1MHz
Measurement signal level 500mV, 1V rms
Output resistance 1Ω (@ 1kHz in 2.2mF and higher ranges; @100kHz in the 22nF and higher ranges), 20Ω (in ranges other than the above)
Display LED (six digits, full scale count depends on measurement range)
Measurement time 2ms typical (FAST mode) Actual measurement time depends on measurement configuration settings
Function BIN (measurement values can be classified by rank), Trigger-synchronous output, Setting configurations can be stored, Comparator, Averaging, Low-C reject (bad contact detection), Chatter detection, Current detection circuit monitoring, Applied voltage value monitoring, EXT. I/O, RS-232C, GP-IB
Power consumption Selectable 100, 120, 220 or 240V AC ±10%, 50/60Hz 40VA max.
Dimensions, mass 260 mm (10.24 in) W × 100 mm (3.94 in) H × 298 mm (11.73 in) D, 4.8 kg (169.3 oz)
Supplied accessories Power cord × 1, Spare fuse × 1