Hioki-3293-50 Clamp on leak HiTester
Hioki-3293-50  Clamp on leak HiTester

Hioki-3293-50 Clamp on leak HiTester

Leverandør: Hioki E.E. Corporation
Varenummer: Hioki-3293-50
PDF Download: Hent brochuren her
Total er excl. moms: DKK 2.510,00
Antal:
tam_new_but2

Hioki 3293-50  Lækstrøms tangmeter.

Easily read measured values from all heights with the adjustable display
  • Measure for leakage current and load all with the same device
  • Innovative flip clamp design
  • Flip display to see measurement readings from any angle
  • 1mA to 1000A accuracy guaranteed, 6 ranges and bar graph display
  • Measure and display only the leakage current of commercial frequency components using the filter function
Basic specifications(Accuracy guaranteed for 1 year, or opening and closing of the clamp sensor 10,000 times)
AC Current 30.00m/300.0m/6.000/60.00/600.0/1000A, 6 ranges, 45Hz to 400Hz, True RMS
Basic accuracy: ±1.5% rdg. ±5dgt. (50/60Hz, filter ON)
DC Voltage None
Frequency None
Crest factor 2.8 and under (1.68 and under at 1000 A range)
Filter function Cut off frequency 180Hz at filter ON (-3dB)
Output function None
Other function Flip-open mechanism (but still retaining proper orientation of display), Back light, Maximum value display, Data hold, Auto power off
Display Digital LCD, max. 6000dgt., 91 segments
Display refresh rate: 1.1 sec or higher
Power consumption Coin type lithium battery (CR2032) × 1, Continuous use 18 hours
Core jaw dia. φ 24mm (0.94 in)
Dimensions, mass 50mm (1.97 in) W × 130mm (5.12 in) H × 26mm (1.02 in) D, 135g (4.8 oz)
Supplied accessories Strap × 1, CARRYING CASE 9757× 1, Coin type lithium battery (CR2032, for trial purposes only) × 1, Quick start sticker × 1