Hioki-IM3570 Impedance Analyzer
Hioki-IM3570  Impedance Analyzer

Hioki-IM3570 Impedance Analyzer

Leverandør: Hioki E.E. Corporation
Varenummer: Hioki-IM3570
PDF Download: Hent brochuren her
Før pris: DKK 62.610,00
Total er excl. moms: DKK 43.827,00
Antal:
tam_new_but2

Hioki IM3570 Impedans analysator.

Se introduktionsvideoen her:  

Hioki IM3570 Impedance Analyzer Video

 

 

Single Device Solution for High Speed Testing and Frequency Sweeping
  • LCR measurement, DCR measurement, sweep measurement, continuous measurement and high-speed testing achieved with one instrument
  • High-speed testing, achieving maximum speeds of 1.5ms (1 kHz) and 0.5ms (100kHz) in LCR mode
  • High-accuracy measurements, basic accuracy of Z parameter: ± 0.08%
  • Perfect impedance analyzer for testing the resonance characteristics of piezoelectric elements, C-D and low ESR measurement of functional polymer capacitors, DCR and L-Q measurement of inductors (coils and transformers)
  • Perform frequency sweeps, level sweeps, and time interval measurements in analyzer mode
This product is not supplied with measurement probes or test fixtures. Please select and purchase the measurement probe or test fixture options appropriate for your application separately.
Basic specifications (Accuracy guaranteed for 1 year)
Measurement modes LCR mode, Analyzer mode (Sweeps with measurement frequency and measurement level), Continuous measurement mode
Measurement parameters Z, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp, D (tanδ), Q
Measurement range 100 mΩ to 100 MΩ, 12 ranges (All parameters are determined according to Z)
Display range Z, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp : ±(0.000000 [unit] to 9.999999G [unit], Absolute value display for Z and Y only
θ : ±(0.000° to 999.999°), D : ±(0.000000 to 9.999999)
Q : ±(0.00 to 99999.99), Δ % : ±(0.0000% to 999.9999%)
Basic accuracy Z : ±0.08%rdg. θ: ±0.05°
Measurement frequency 4 Hz to 5 MHz (10 mHz to 100 Hz steps)
Measurement signal level V mode/CV mode (normal mode):
  50 mV to 5 Vrms, 1 mVrms steps (up to 1 MHz),
  10 mV to 1 Vrms, 1 mVrms steps (over 1.0001 MHz)
CC mode (normal mode):
  10 μA to 50 mArms, 10 μArms steps (up to 1 MHz)
  10 μA to 10 mArms, 10 μArms steps (over 1.0001 MHz)
Output impedance Normal mode: 100 Ω
Low impedance high accuracy mode: 10 Ω
Display 5.7-inch color TFT, display can be set to ON/OFF
Measurement time 0.5 ms (100 kHz, FAST, display OFF, representative value)
Measurement speed FAST/ MED/ SLOW/ SLOW2
Functions DC bias measurement, Comparator, Panel loading/saving, Memory function
Interface EXT I/O, RS-232C, GP-IB, USB communication, USB memory, LAN
Power supply, consumption 90 to 264 V AC, 50/60 Hz, 150 VA max.
Dimensions, mass 330 mm (12.99 in) W × 119 mm (4.69 in) H × 307 mm (12.09 in) D, 5.8 kg (204.6 oz)
Supplied accessories Power cord × 1