ETI-221-091 MicroTherma 1 microprocessor thermometer for TC

The thermometer should never need re-calibrating as the built-in microprocessor enables the instrument to continuously and automatically carry out self-diagnostic re-calibration. An additional feature allows the user to adjust the reading (±2.5°C) to offset any probe errors, correcting any inaccuracies of the thermocouple probe. Each thermometer thereafter will automatically store, display the offset and adjust the instrument for the known probe error, maximising system accuracy.

The MicroTherma 1 has the versatility of accepting any type K, J, T, R, N, S or E thermocouple probe, the probe type is simply selected through the mode button. The unit incorporates both max and min readings with a reset function and also features an auto-power off facility that maximises the battery life, turning the instrument off automatically after 30 minutes, this function can be disabled if not required. Other selectable parameters include: display contrast and internal CJC temperature reading.

The MicroTherma 1 is priced without a probe. 

Optional accessories

The protective PVC boot helps to protect your instrument against accidental damage. The clear polycarbonate wall-mounted thermometer holder stores the instrument safely when not in use (screws not supplied).